GJS03A (FOSC400 B4)

Materials for dome and base: PP alloy;

Material for the tray: ABS      

Size: 540*150*180;            

Max capacity: 144C

Capacity for each tray: 24C

Trays can be hinged 90 degrees flexibly

4 round ports with dia. of----<Φ20mm

1 oval port with size of ----Φ40mm~ Φ60mm  

The main models include:

GJS03A-JF96 (single fiber min:12 cores/max:24*4 cores)

GJS03A-JF144 (single fiber min:12 cores/max:24*6 cores)

GJS03A

fiber optic splice closures are specially designed to protect joints of optic cable. Excessive fibers can be stored in storage baskets behind the splice trays. The optical fibers are taken into from sides of splice tray. One tray can accommodate up to 24 fiber splices; Per closure can accommodate up to 6 trays.
The dome material mixed chemical agent to resist corrosion and aging and also provide ultra-violet protection.

Application :

It can be installed in aerial locations, ducted applications, direct buried, manholes. Small volume but large capacity.

Features:
1. Excessive fibers can be stored in storage baskets. Easy in fiber management.
2. Fabricated by mixing the imported material and other chemical assistant agent (ageing resistance & ultraviolet radiation resistance), increase of service life
3. Base-to-dome seals on FOSC are mechanical and heat-shrinkable for ease of installation and reentry. No other sealing adhesive tape is needed
4. Base and dome sealed with clamp and O-ring system
5. The splice trays are hinged for access to any splice without disturbing others trays
6. The inner parts and fixing parts are made of stainless steel
7. FOSC with a earthing device protect it from damage by lightning
8. Compatible with most cable types(single fiber or ribbon), and cable constructions(loose tube, central core, slotted core, modular). And the product can be used in any environment (aerial, buried, handhole, manhole)and in many applications(tap-off, expressed, branch, and repair)
9. No special tools are needed to open the closure, and it can be opened and used repeatedly.

Technical Parameter:

1. Working Temperature: -40 degrees centigrade~+70 degrees centigrade
2. Atmospheric Pressure: 70~150Kpa
3. Axial Tension: >2000N/1min
4. Stretching Resistance: 2500N/10 square centimetre(1min)
5. Insulation resistance: >2*104MΩ
6. Voltage Strength: 15KV/1min, no arcover or breakdown
7. Pressure in the water: 50m/72hours
8. Splice tray with optical taking-in radius≥ 40mm. Low optical loss.