-
Move your mouse over image or click to enlarge
1x16 Fiber Optic PLC Splitter, Steel Tube, Bare Fiber 250μm, No connector
Planar lightwave circuit (PLC) splitter is a type of optical power
management device that is fabricated using silica optical waveguide
technology to distribute optical signals from Central Office (CO) to
multiple premise locations.
Bare fiber splitter is a kind of ODN product suitable for PON networks
that can be installed in the pigtail cassette, test instrument and WDM
system, which minimizes the space occupation. It is relatively fragile
on fiber protection and need a complete protection design on carrying
box body and device.
| Features | Application |
| 1x16 bare splitter, unconnectorized | Optical Signal Distribution |
| 250μm ITU G.657A1 for fiber input/output | Data Communications |
| Low insertion loss ≤ 4.0dB | Lan and CATV System |
| Low polarization dependent loss (PDL) ≤ 0.2dB | FTTX Deployment |
| Operating bandwidth: 1260 - 1650nm | FTTH Network |
| Compact design, suitable for installation in optical equipments | Passive Optical Networks (PON) |
| Wide Operating Temperature: -40 - 85°C, support industry standard applications | Measuring System and Laser System |
| High reliability and stability, Telecordia GR-1221/1209 compliant | DWDM and CWDM Systems |
Telcordia 1209 & 1221 Test Results
Name of the test
Condition
Duration
Temperature- Humidity aging
85°C and 85% RH
7 days
Vibration
10 - 55Hz, 1.52mm double amplitude, in three axes
1 hour
Component Impact
Test Impact of 500g (mass ≤ 0.125kg), 1ms , half sine pulse
2 impacts
Temperature Cycling Test
-40 - 70°C, Ramp rate: 1°C /min, Dwell time > 15min
10 cycles
Temperature- Humidity cycling
-40 - 85°C , between 10°C and 23°C - 85% RH, at 85°C - 20%RH,
between °C and 85°C - maintain a linear change in RH,
below 10°C - uncontrolled RH
between °C and 85°C - maintain a linear change in RH,
below 10°C - uncontrolled RH
14 days
Water Immersion
43 ± 2°C , PH 5.5 ± 0.5
7 days
Fiber Side Pull test
0.23 kg load, 90° angle , 2 directions
5 seconds
Fiber Side Pull test
0.45 Kg load for Single Input Fiber, 1.5 Kg load for 8 Fiber Ribbon Outputs
PLC Splitter Pen Type (1:2/4/8/16/32/64)
- Brand: An-Net
- Product Code: PLC Splitter Pen Type (1:2/4/8/16/32/64)
-
৳0.00
- Where To Buy